Why the aluminium
spout pouch need to include a Nylon layer?
Comparing with the common doypack aluminium, we can find the material structure of aluminium spout pouch included one more layer-NYLON, so, why it need to add this layer?
Ok, let's see what happens if we let the aluminium spout pouch cancel this Nylon layer?
PE is a kind of plastic that only could resist 100℃ in max and the heat sealing temperature of weldspout process is high(approx. up to 120℃-130℃),when the temperature transmit through the layer of aluminum foil,80%-90% of temperature will be directly acted on the PE layer.
If the ratio of temperature transmission is
unstable, it will cause below two situation:
(1) The temperature transmission is just right,
the PE layer is intact.
(2) The temperature transmission is beyond
100℃, a partial
of PE layer is “destroyed” and cause the pouch leakage problem.
Can we solve this problem by reducing the
heat sealing temperature? Yes, but it will still cause another two situation:
(1) The temperature transmission is just right,
and the PE layer is intact
(2) The temperature transmission is below
100℃ and PE
layer cannot be welded tightly with the spout neck, it will still cause the
pouch leakage problem
Nylon is a kind of plastic with good heat resistance and heat transmission character, one side, it can be ”protected” the PE layer, another side, it can let the spout pouch bags owned a better character against the impact force, why not?
Author:
Paul Jiang
Article
source: https://www.fenbopackaging.com/why-the-aluminium-spout-pouch-need-to-include-a-nylon-layer-a-37.html
Website: www.fenbopackaging.com
Email: fenbopacking@gmail.com
没有评论:
发表评论